01-07-2017, 04:35 AM
Why cant i disconnect my wifi adapter and use my Ethernet, it just just stays at unidentified network and doesn't connect
I enabled a static ip address do i need these settings or
|
01-07-2017, 04:35 AM
Why cant i disconnect my wifi adapter and use my Ethernet, it just just stays at unidentified network and doesn't connect
01-07-2017, 05:43 AM
(This post was last modified: 01-07-2017, 06:04 AM by LarryTheComputerGuy.)
(01-07-2017, 04:35 AM)smirk24 Wrote: Why cant i disconnect my wifi adapter and use my Ethernet, it just just stays at unidentified network and doesn't connect It could be a setting on your router or damage to the network cable that's giving you the problem.... First Check your cable for any damage. Usually, the most common cable to go bad is the short cable coming from the router to the computer. If the cable is ok... try rebooting your router by either turning off the power or unplugging it for 10 seconds, then turn it back on. If that doesn't work, Contact your ISP and see what they suggest...
L.S. Computer Systems
807 East Broadway Hopewell, VA. 23860, USA +1 (804) 715-8185 https://www.lscomputersystems.com
Ahh it seems like i should just un assign my ip address from the computer any suggestions on how or if i can do so? Because ive already tried all of those except the isp part
01-07-2017, 12:49 PM
Trying to restore my network connections back to default
01-07-2017, 03:42 PM
Here is a bunch of commands you can use to reset your network settings to default.
You can reset the TCP/IP Stack (Winsock) this way. 1. Open Command Prompt and choose Run as administrator. 2. At the command prompt type commands below and press Enter. 3. Restart your PC for the changes to take effect. ipconfig /flushdns netsh int ipv4 reset netsh int ipv6 reset netsh winsock reset netsh int reset all netsh winsock reset catalog netsh int ip reset reset.log nbtstat -R nbtstat -RR
<left><form action="https://www.paypal.com/cgi-bin/webscr" method="post">If you are satisfied with my help, consider a donation. Thank you so much for your continued support!
<input type="hidden" name="cmd" value="_s-xclick"> <input type="hidden" name="hosted_button_id" value="Y4ZDLXGFS4F8Q"> <input type="image" src="https://www.paypalobjects.com/en_US/GB/i/btn/btn_donateCC_LG.gif" border="0" name="submit" alt="PayPal — The safer, easier way to pay online."> <img alt="" border="0" src="https://www.paypalobjects.com/en_GB/i/scr/pixel.gif" width="0" height="0"> </form> </div></left>
01-08-2017, 04:05 AM
I ran the commands then restarted my computer and no difference but then i reinstalled my network card and its all fine and dandy we can close the thread thank you all for your help.
01-08-2017, 04:13 AM
(01-08-2017, 04:05 AM)smirk24 Wrote: I ran the commands then restarted my computer and no difference but then i reinstalled my network card and its all fine and dandy we can close the thread thank you all for your help. Good to hear smirk24....
L.S. Computer Systems
807 East Broadway Hopewell, VA. 23860, USA +1 (804) 715-8185 https://www.lscomputersystems.com |
Users browsing this thread: |
2 Guest(s) |