My Windows 7 partition gets a BSOD and the stop is 0x0000007B.
I've tried everything that comes up on any search engine of any choice. ie.
RUN chckdsk
Run SFC /Scannow
Tried to change in BIOS from SATA to IDE
Even the own video by BRITEC on Youtube.
Tested both HDD and RAM and both are good to go.
Starting up with Last Known Good Configuration
Cleared the CMOS
Updated the BIOS
Repaired Start in Win RE (doesn't work)
Controlled and re-reseated the SATA cables
Performed DISM.exe /Online /Cleanup-image /Restorehealth
Performed bootrec /fixmbr, bootrec /scanOS, /RebuildBCD
I have vague memories that I was using a automatic driver software and I involuntarily installed possible erronous driver against me knowing this.
Is there a way to revert windows installation with DISM++ (a third party software)?
My computer specs are as follows:
Motherboard: ASROCK Z97 Anniversary
CPU: i5 4690K 3.5 Ghz
RAM: 16 GB
I've tried everything that comes up on any search engine of any choice. ie.
RUN chckdsk
Run SFC /Scannow
Tried to change in BIOS from SATA to IDE
Even the own video by BRITEC on Youtube.
Tested both HDD and RAM and both are good to go.
Starting up with Last Known Good Configuration
Cleared the CMOS
Updated the BIOS
Repaired Start in Win RE (doesn't work)
Controlled and re-reseated the SATA cables
Performed DISM.exe /Online /Cleanup-image /Restorehealth
Performed bootrec /fixmbr, bootrec /scanOS, /RebuildBCD
I have vague memories that I was using a automatic driver software and I involuntarily installed possible erronous driver against me knowing this.
Is there a way to revert windows installation with DISM++ (a third party software)?
My computer specs are as follows:
Motherboard: ASROCK Z97 Anniversary
CPU: i5 4690K 3.5 Ghz
RAM: 16 GB