I currently ran into a bsod 0x1000008E (0xFFFFFFFFC0000005, 0xFFFFFFFF81A84B4D, 0xFFFFFFFF88197924, 0x0) ntoskrnl.exe (nt+0x233B4D) which was strange because iwas just going through my services.
System Specs: https://speccy.piriform.com/results/cdoKfl7JuIZIbBpESDTmZLI
I have done:
1. chkdsk /f found problems (log is below)
2. sfc /scannow found problems (lof was to big to add)
3. Adwcleaner (found nothing)
4. Norton Power Eraser(found uac is disabled) ( I purposely disabled uac)
5. Farbar Recovery Scan Tool (Logs Below)
[
attachment=3350]
[
attachment=3351]
[
attachment=3352]
[
attachment=3353]
The bsod just happened today no previous bsods
What was you doing on the computer at the time of the BSOD?
(02-12-2018, 09:49 PM)Britec Wrote: [ -> ]What was you doing on the computer at the time of the BSOD?
I had firefox open to its default page it installs with and i had windows services open and i was researching some of the services
Please upload dump file to
OSR Online this will debug the dump file. It also wont hurt to run memtest
(02-12-2018, 10:08 PM)Britec Wrote: [ -> ]Please upload dump file to OSR Online this will debug the dump file. It also wont hurt to run memtest
Alright thank you britec. I forgot to add but i ran windows memory diagnostic and every thing turned out good.
But i just also ran into bsod stop 0x00000019 while i was starting my workstation service
(02-12-2018, 10:32 PM)smirk24 Wrote: [ -> ] (02-12-2018, 10:08 PM)Britec Wrote: [ -> ]Please upload dump file to OSR Online this will debug the dump file. It also wont hurt to run memtest
Alright thank you britec. I forgot to add but i ran windows memory diagnostic and every thing turned out good.
But i just also ran into bsod stop 0x00000019 while i was starting my workstation service
Is this type of ram not compatible with a dell dimension 8400?
Type: DDR2
Size: 1024 MBytes
Manufacturer: Kingston
Max Bandwidth: PC2-5300 (333 MHz)
Part Number
Serial Number: 2450045350
Dell Dimension 8400 Only Supports DDR2 non-ECC memory only
Search
here
Make sure you run 8 passes minimum with one stick in at a time with
memtest.
It also could be a driver issue
(02-13-2018, 01:07 PM)Britec Wrote: [ -> ]Dell Dimension 8400 Only Supports DDR2 non-ECC memory only
Search here
Make sure you run 8 passes minimum with one stick in at a time with memtest.
It also could be a driver issue
It was the ram that was installed. Thanks for your help britec