try a different mouse and keyboard
try booting without a keyboard then check to see if the mouse will stop working
or try booting without mouse then check to see if it will keyboard will stop working
is it a desktop or laptop?
(08-21-2017, 11:01 AM)Compton Wrote: [ -> ]try a different mouse and keyboard
try booting without a keyboard then check to see if the mouse will stop working
or try booting without mouse then check to see if it will keyboard will stop working
is it a desktop or laptop?
So I tried alternating the keyboard/mouse and different keyboards, no joy.
Its a brand new HP Pavilion Desktop
Computer A was win7 64bit IDE
Computer B is SATA win7 64bit
(08-21-2017, 12:11 PM)GuiltySpark Wrote: [ -> ]A few options here;
https://www.howtogeek.com/239815/why-cant-you-move-a-windows-installation-to-another-computer/
Use a ps2 Kboard + mouse as these generally work OOB
There r no ports in new PC for a ps2 Kboard/mouse
make sure all other USB devices are unplugged probably did try this
make sure you try a different mouse and keyboard
try resetting bios
This sounds like the USB Driver hasn't been added to Acronis Universal Restore CD which would explain why your mouse and keyboard are not working.
I would try macrium like Larry suggested because I use that software all the time and it automatically adds the drivers to the boot disk, same as rescue CD
Here is some more info:
https://kb.macrium.com/KnowledgebaseArticle50126.aspx
Thanks for the help. Moving an hd from one build to another is always a bad idea, unless u have zero choice and plenty of time.
This project didn't work and I hope I don't have this situation again..
As I mentioned, bad experience with "Acronis" in the past and now I have hit a deadline, so case closed.
Ta
(08-23-2017, 09:44 PM)zINc Wrote: [ -> ]Thanks for the help. Moving an hd from one build to another is always a bad idea, unless u have zero choice and plenty of time.
This project didn't work and I hope I don't have this situation again..
As I mentioned, bad experience with "Acronis" in the past and now I have hit a deadline, so case closed.
Ta
Ok then, no problem!
If you want this thread reopened, just kindly ask the admins
Thread Closed
Whats the default settings of the bios? If your system says ahci is the default then select defaults and after its saved restart the computer and see what happens.