06-09-2017, 05:59 PM
If you want to upgrade your H96 Pro+ Firmware I have created this easy to follow step by step guide on how to update your H96 Pro+ Firmware to Android 7.1 Nougat. It does not matter what brand of H96 Pro+ Android TV Box you are using it will work the same on all TV Boxes. I will list what you will need below.
Follow these steps:
Step 1. Download the Burn Card Maker software this can be got from the link below.
Step 2. Download the Firmware image from the same link below.
Step 3. Use 7Zip to Unzip the firmware into a folder. Bow use 7Zip to Unzip Burn Card Maker software in the Firmware image folder.
Step 4. Insert the Micro SD card into your computer.
Step 5. Open the folder for Burn Card Maker program, and run it.
Step 6. The program starts in Chinese, which will need to be switched to English by selecting the Chinese writing in the top left corner of the program and select the second option, now put check box in English version box. Click OK and then exit the program and then restart it again to get it in English version of Burn Card Maker.
Step 7. Put a checkmark in the 4 boxes and choose your Micro SD disk.
Step 8. Now click Open and navigate to the firmware folder and select the image file. Now just click the Make button to start to write to the Micro SD.
Step 9. Once complete close the program and remove the micro SD card from the computer.
Step 10. Connect the TV box to your TV using the HDMI cable and insert your Micro SD card into the SD card slot
Important: Do not plug in the power cord in the TV Box at this time.
Step 11. Use a paper clip or pin to press and hold the reset button in on the TV Box. While pressing the reset button, plug in the power cord in to the TV box and wait until you see the upgrading tv box screen. Now you can release the reset button and the upgrade process will start to upgrade your firmware.
Download aml_7.1_s912_q9377-H96PROPLUS_mac-20170422.img
Download Burn Card Maker
Follow these steps:
Step 1. Download the Burn Card Maker software this can be got from the link below.
Step 2. Download the Firmware image from the same link below.
Step 3. Use 7Zip to Unzip the firmware into a folder. Bow use 7Zip to Unzip Burn Card Maker software in the Firmware image folder.
Step 4. Insert the Micro SD card into your computer.
Step 5. Open the folder for Burn Card Maker program, and run it.
Step 6. The program starts in Chinese, which will need to be switched to English by selecting the Chinese writing in the top left corner of the program and select the second option, now put check box in English version box. Click OK and then exit the program and then restart it again to get it in English version of Burn Card Maker.
Step 7. Put a checkmark in the 4 boxes and choose your Micro SD disk.
Step 8. Now click Open and navigate to the firmware folder and select the image file. Now just click the Make button to start to write to the Micro SD.
Step 9. Once complete close the program and remove the micro SD card from the computer.
Step 10. Connect the TV box to your TV using the HDMI cable and insert your Micro SD card into the SD card slot
Important: Do not plug in the power cord in the TV Box at this time.
Step 11. Use a paper clip or pin to press and hold the reset button in on the TV Box. While pressing the reset button, plug in the power cord in to the TV box and wait until you see the upgrading tv box screen. Now you can release the reset button and the upgrade process will start to upgrade your firmware.
Download aml_7.1_s912_q9377-H96PROPLUS_mac-20170422.img
Download Burn Card Maker
