Britec Tech Support Forum

I was looking over the frst log and I found a section which I have I have a picture of below and I'm curious of why it says something about bad memory?

Notes: I was looking through britecs videos and searched for the videos he has done about farbar but I only found old videos that are less complicated then the newer versions so I don't understand the log as well. britec can you explain this to me or possibly make a video on the updated version of Farbar Recovery Scan Tool.









[attachment=2783]

[attachment=2784]

[attachment=2786]

[attachment=2787]

That error is coming from Windows Memory Tester 


Run test with memtest you will have to do more than one pass to get accurate result

How would be able to memtest to a usb and boot to it using a pc with uefi?

that link is a bit outdated which tell me britec have not update Memtest86 in a long time

britec its important to keep stuff updated  


here is a updated link MemTest86

[attachment=2788]

how to write memtest86 to a flash drive

I don't use memtest

oh that would explain it was just pulling your fingers on that one

hope it did not crack too hard

memtest86 is so old, they need to have a special day named after it

What do you use to test your memory britec?

he probably just swap them out Britec is a man of many memory DDR2 DDR3 DDR4 lol

I am sure he still forget a lot lol

All jokes aside... Memtest86 is a very good program for testing RAM...