Britec Tech Support Forum

Do I set the CPU OPT to auto or manual FULL if I connect the WC pump to it?Asetek 510 LC with 120 mm fan connected to CPU FAN.

CPU OPT is for a second CPU Fan, I would set that to "FULL" if your going to use it.

Installation Guides

Asetek Gen4 Installation Guide


Asetek Gen5 Installation Guide

(02-19-2016, 12:02 AM)Britec Wrote: [ -> ]CPU OPT is for a second CPU Fan, I would set that to "FULL" if your going to use it.

Installation Guides

Asetek Gen4 Installation Guide


Asetek Gen5 Installation Guide

Thank you...I am not sure which one I am SUPPOSED to use.The rest are all case fan plugs.CPU_OPT seems the only other choice.I won't be doing it for a few days.Trying to gather info first.

[attachment=751]

So,I take it you mean hook the pump up to the CPU_FAN and then connect the Fan on the radiator to the CPU_OPT?Thank you for your help.I will donate something when my disability comes next month.(I am old)

CPU_OPT

CPU_FAN

Should both deliver 12v but plug pump into CPU_FAN and Fan for CPU_OPT

(02-21-2016, 10:11 AM)Britec Wrote: [ -> ]CPU_OPT


&
CPU_FAN

Should both deliver 12v but plug pump into CPU_FAN and Fan for CPU_OPT

Thank you again....awfully decent of you to help.