update on on the nonbootable driver

[nsm0220]

(07-03-2015, 10:12 PM)Britec Wrote:  You really need to do a full scan of that drive to determine if it is bad, you screen shot shows the drive is damaged. You say Seatools wont run, maybe because drive is bad. You have got to test that drive.

it was a bug that cause the freeze

---

(07-03-2015, 10:27 PM)Compton Wrote:  the drive may not be complete dead it's slowly going bad

you don't want to wait when it's complete dead because your data will be dead too

thats why im fixing that file so i can into that windows and get my stuff out of there

[Compton]

don't wanna to sound rude here but I feel we are going around in circles

if you feel the drive is not going bad or damage I wish you well

we can only advise you on what we see

---

like I said you can boot up linux and get your data off

[nsm0220]

(07-03-2015, 10:43 PM)Compton Wrote:  don't wanna to sound rude here but I feel we are going around in circles

if you feel the drive is not going bad or damage I wish you well

we can only advise you on what we see

---

like I said you can boot up linux and get your data off

he wants to see the whole thing from the boot cd and how do i add this to the commend where the hard drive in ? expand D:\i386\ntoskrnl.exe C:\Windows\system32

[nsm0220]

no bad aeras on the hard drive from one of the test i did from the boot cd

[Britec]

Its a old video, but I think its what your asking to do. expand d:\i386\ntoskrnl.ex_ c:\windows\system32

Missing or corrupt ntoskrnl.exe file

1. Insert the Microsoft Windows XP CD (Not a recovery CD or restore CD)
2. Reboot the computer
3. At press any key to boot message press Enter key.
4. In the Microsoft Windows XP setup menu press the R key to enter the recovery console. 
5. Select the operating system you want to repair
6. Enter the administrator password
7. Type: expand d:\i386\ntoskrnl.ex_ c:\windows\system32
8. You will be prompted, do you wish to overwrite the file? Type: Y and press enter to overwrite the file. 
9. Type exit to reboot the computer.
10.  
    

For windows 7 follow this guide

[nsm0220]

(07-04-2015, 10:06 AM)Britec Wrote:  Its a old video, but I think its what your asking to do. expand d:\i386\ntoskrnl.ex_ c:\windows\system32

Missing or corrupt ntoskrnl.exe file

1. Insert the Microsoft Windows XP CD (Not a recovery CD or restore CD)
2. Reboot the computer
3. At press any key to boot message press Enter key.
4. In the Microsoft Windows XP setup menu press the R key to enter the recovery console. 
5. Select the operating system you want to repair
6. Enter the administrator password
7. Type: expand d:\i386\ntoskrnl.ex_ c:\windows\system32
8. You will be prompted, do you wish to overwrite the file? Type: Y and press enter to overwrite the file. 
9. Type exit to reboot the computer.
10.  
    

For windows 7 follow this guide

i can use a xp boot cd for this and you should update the video as well

[Britec]

Yeah will do at some point. Problem solved - Thread Closed.